MX

MX Series
MX 4

To get high performance in 5-axis, MX 4 provides greater multi-functionality in roughing to finishing as well in turning operation. The portal structure configuration of machine allows flexibility to adapt variety of mechanical requirements. Linear Motor and high precision L.M guideways allow high speed at high acceleration rates. High speed electro-spindle assures high material removal rate. Table is equipped with TRIM on a 45° plane allowing tilting of -45° /+180°. Machine is equipped with a twin pallet whose, large number of tool ATC which are very useful in sector of aerospace industries, energy as well as in for precise and complex job.
Key Features
  • Portal type rigid structure.
  • Harmonically and thermally stabled machine
  • Linear motor technology enabling rapid of 120m/min.
  • High Speed 24000rpm electro-spindle.
  • Rotary Swivelling Table (A-Axis: -45/+180 C-Axis: 360 )
  • TRIM table with 100rpm for turning operations
  • Faster automatic work piece changer.
  • Fast 36 tool chain type ATC
  • Electrical with quality device & panel AC.
  • Efficient chip flow and effective chip removal.
  • Auto & manual coolant.
  • Centralized & programmable lubrication.
  • Simultaneous 5-Axis Machining
    Simultaneous 5-Axis Machining
  • High Speed Machining
    High Speed Machining
  • Automatic Pallet Changer
    Automatic Pallet Changer
  • High Speed Electro Spindle
    High Speed Electro Spindle
  • TRIM Table
    TRIM Table
    MX 4
Linear  Axis X/Y/Z    
Travels mm 750 x 700 x 500
Rapid Feed rates m/min X=60,Y-Z=120
Acceleration on Axis m/s2 X=6,Y-Z=10
Rotating Axis on Table A-C    
A:Tilting Table on a 45˚ Plane Deg. -45/180
C:Rotating Table Deg. 360˚
Working Position   Horizontal Position=0 Vertical Position=90˚
Area mm Ø440
Admissible Load kg 250
Rotating Speed rpm 100
Torque: Motor /Clamping   A=740Nm,C=430Nm/A,C=2500Nm
Accuracies    
Uncertainty : P mm/sec 0.004/7.2
Repetability : Ps Medium mm/sec 0.002/3.6
Spindle    
Rotating Speed rpm 24000
Taper   HSK 63-A
Power-Torque kW/Nm 25/20-40/32
Characteristics Speed rpm 6000
Tool Magazine    
Pocket Qty.   36
Taper   HSK 63A
Tool Dimension: Length-Diameter-Weeight mm-Ømm-kg 250-70-5
Coolant    
Flow-Pressure l/min-bar 30-3
Tank Liters 250
* Depend upon clamping arrangement, Tooling & Job
# Refer machine detailed layout