India
KX
KX/K2X Series
Varients:
K2X 8 / 10 / 20, KX 10 / 20
These portal type high performance machining centre enables machining operation in 3-Axis from roughing to finishing with a broad job envelope. High Performance structure which maximizes structural rigidity & allows optimum harmonic stability & maximum damping during demanding cutting conditions. Powerful spindle with high torque allows high mental removal rate & spindle vibration monitoring allowing high level of harmonic stability.
Key Features
- High dynamics structure support rapid up to 40m/min.
- Bridge type structure with portal in ribbed cast iron with stiff wall.
- Hard material machining in a minimal time.
- Accurate roughing to finishing operation.
- Higher load carrying capacity of table.
- High speed electro-spindle.
- Wider roller type liner motion guide ways.
- Box type guideways for KX Series
- Very large accessibility from the top.
- Electrical with quality device & panel AC.
- Auto & manual coolant.
- Centralized & programmable lubrication.
-
High Speed Machining -
TPM Friendliness
-
High Speed Electro Spindle
| K2X8 | K2X10 | K2X20 | KX10 | KX 30 | ||
| Table | ||||||
| Table Size | mm | 800 x 600 | 1150 x 800 | 1400 x 1000 | 1250 x 700 | 2000 x 1000 |
| Distance Spindle Nose / Table Area | mm | 100/550 | 115/615 | 250/750 | 145/745 | 250/840 |
| Admissible Load | kgf | 500 | 1000 | 2000 | 1500 | 2500 |
| Capacity | ||||||
| X-Axis Travel | mm | 700 | 1000 | 1200 | 1000 | 1800 |
| Y-Axis Travel | mm | 600 | 800 | 1000 | 700 | 1000 |
| Z-Axis Travel | mm | 450 | 500 | 500 | 600 | 600 |
| Rapid Traverse (X,Y & Z Axis) | m/min | 40 | 60 | X=50,Y-Z=60 | X-Y=30,Z=18 | X-Y=30,Z=18 |
| Acceleration | m/sec2 | 4 | 4 | X=4,Y-Z=6 | 3 | 3 |
| Accuracy on Linear Axis | ||||||
| Uncertainty P | µm | 4 | 4 | 5 | 7 | X=9 , Y-Z=7 |
| Repetability :Ps medium | µm | 2 | 2 | 3 | 5 | 5 |
| Spindle | ||||||
| Rotating speed | rpm | 24000 | 18000 | 18000 | 18000 | 18000 |
| Taper | HSK 63A | HSK 63A | HSK 63A | HSK 63A | HSK 63A | |
| Power-Torque | kW-Nm | 25/20-40/32 | 32/25-130/86 | 32/25-130/86 | 32/25-130/86 | 32/25-130/86 |
| Characteristics speed | rpm | 6000 | 2800 | 2800 | 2800 | 2800 |
| Tool Magazine | ||||||
| Pocket qty. | 20 | 20 | 20 | 20 | 20 | |
| Taper | HSK 63A | HSK 63A | HSK 63A | HSK 63A | HSK 63A | |
| Tool Dimention: | ||||||
| Length - Diameter - Weight | mm-Ømm-kg | 300-90-8 | 300-90-5 | 300-90-5 | 300-90-5 | 300-90-5 |
| Coolant | ||||||
| Flow-Pressure | l/min-bar | 30-3 | 30-3 | 30-3 | 30-3 | 30-3 |
| Tank | Litres | 230 | 250 | 330 | 150 | 600 |
* Depend upon clamping arrangement, Tooling & Job
# Refer machine detailed layout
