KX

KX/K2X Series

These portal type high performance machining centre enables machining operation in 3-Axis from roughing to finishing with a broad job envelope. High Performance structure which maximizes structural rigidity & allows optimum harmonic stability & maximum damping during demanding cutting conditions. Powerful spindle with high torque allows high mental removal rate & spindle vibration monitoring allowing high level of harmonic stability.
Key Features
  • High dynamics structure support rapid up to 40m/min.
  • Bridge type structure with portal in ribbed cast iron with stiff wall.
  • Hard material machining in a minimal time.
  • Accurate roughing to finishing operation.
  • Higher load carrying capacity of table.
  • High speed electro-spindle.
  • Wider roller type liner motion guide ways.
  • Box type guideways for KX Series
  • Very large accessibility from the top.
  • Electrical with quality device & panel AC.
  • Auto & manual coolant.
  • Centralized & programmable lubrication.
  • High Speed Machining
    High Speed Machining
  • TPM Friendliness
    TPM Friendliness
  • High Speed Electro Spindle
    High Speed Electro Spindle
  K2X8K2X10K2X20KX10KX 30
Table      
Table Sizemm800 x 6001150 x 8001400 x 10001250 x 7002000 x 1000
Distance Spindle Nose / Table Area mm100/550115/615250/750145/745250/840
Admissible Loadkgf5001000200015002500
Capacity      
X-Axis Travelmm7001000120010001800
Y-Axis Travelmm60080010007001000
Z-Axis Travelmm450500500600600
Rapid Traverse (X,Y & Z Axis)m/min4060X=50,Y-Z=60X-Y=30,Z=18X-Y=30,Z=18
Accelerationm/sec244X=4,Y-Z=633
Accuracy on Linear Axis      
Uncertainty Pµm4457X=9 , Y-Z=7
Repetability :Ps mediumµm22355
Spindle      
Rotating speedrpm2400018000180001800018000
Taper HSK 63AHSK 63AHSK 63AHSK 63AHSK 63A
Power-TorquekW-Nm25/20-40/3232/25-130/8632/25-130/8632/25-130/8632/25-130/86
Characteristics speedrpm60002800280028002800
Tool Magazine      
Pocket qty. 2020202020
Taper HSK 63AHSK 63AHSK 63AHSK 63AHSK 63A
Tool Dimention:      
Length - Diameter - Weightmm-Ømm-kg300-90-8300-90-5300-90-5300-90-5300-90-5
Coolant      
Flow-Pressurel/min-bar30-330-330-330-330-3
TankLitres230250330150600
* Depend upon clamping arrangement, Tooling & Job
# Refer machine detailed layout