KX/K2X Series

(Model Variant: K2X 8/10/20, KX 10/20)

These portal type high performance machining centre enables machining operation in 3-Axis from roughing to finishing with a broad job envelope. High Performance structure which maximizes structural rigidity & allows optimum harmonic stability & maximum damping during demanding cutting conditions. Powerful spindle with high torque allows high mental removal rate & spindle vibration monitoring allowing high level of harmonic stability.

KX/K2X Series

Features

Key Features

  • High dynamics structure support rapid up to 40m/min.
  • Bridge type structure with portal in ribbed cast iron with stiff wall.
  • Hard material machining in a minimal time.
  • Accurate roughing to finishing operation.
  • Higher load carrying capacity of table.
  • High speed electro-spindle.
  • Wider roller type liner motion guide ways.
  • Box type guideways for KX Series
  • Very large accessibility from the top.
  • Electrical with quality device & panel AC.
  • Auto & manual coolant.
  • Centralized & programmable lubrication.

High Speed Machining

TPM Friendliness

High Speed Electro Spindle

Technical Specification

    K2X 8 K2X 10 K2X 20 KX 10 KX 30
Capacity            
X-Axis Travel mm 700 1000 1200 1000 1800
Y-Axis Travel mm 600 800 1000 700 1000
Z-Axis Travel mm 450 500 500 600 600
Table            
Table Area mm 800 x 600 1150 x 800 1400 x 1000 1250 x 700 2000 x 1000
Admissible Load Kg 500 1000 2000 1500 2500
Distance Spindle Nose/Table Area mm 100/550 115/615 250/750 145/745 250/840
Feed            
Rapid Traverse m/min 40/40/40 60/60/60 50/60/60 30/30/18 30/30/18
Acceleration m/sec2 4/4/4 6/6/6 4/6/6 3/3/3 3/3/3
Spindle            
Rotating Speed rpm 24000 18000 18000 18000 18000
Taper   HSK 63A HSK 63A HSK 63A HSK 63A HSK 63A
Power Kw 25/20 35/25 35/25 35/25 35/25
Torque Nm 40/32 130/86 130/86 130/86 130/86
Characteristic Speed rpm 6000 2800 2800 2800 2800
Tool Magazine            
Pocket Quantity   20 20 20 20 20
Tool Length mm 300 300 300 300 300
Tool Diameter mm 90 90 90 90 90
Tool Weight Kg 8 5 5 5 5
Tool Change Time            
Tool/Tool - Chip/Chip Sec 5-11.5 5-9 5-9 5-9 5-9
Accuracy (As per VDI/DGQ 3441)            
Positioning Uncertainty (P) mm 0.004 0.004 0.005 0.007 0.009/0.007/0.007
Repeatability (Ps medium) mm 0.002 0.002 0.003 0.005 0.005
Dimension            
Machine Weight # (Approx.) Kg 7000 10500 12500 14400 17000
Machine Dimension # (Approx.)            
Length mm 4480 5750 5640 4340 5100
Width mm 2570 2840 3520 5050 6310
Height mm 3060 3030 3400 3560 3160
* Depend upon clamping arrangement, Tooling & Job
# Refer machine detailed layout