KX Five Series

(Model Variants: K3X8 Five, K2X10 Five)

The HSM (High Speed Machining) concept, KX FIVE Series Machine enabling operations in 5 simultaneous axis, from r=roughing to finishing, of all types of complex work pieces. These fixed portal type 5-Axis machines combine high dynamics & accuracy to obtain high surface finish even during machining of complex contours & profiles. The table is equipped with TRIM technology inclined at 55⁰ plane allowing a tilting from -30⁰ to +180⁰ with a rotational speed of 50 rpm & 0.001⁰ incremental measuring. Machine is available with palletization device with variety of options in spindle according to application.

KX Five Series

Features

Key Features

  • Structure with fixed portal in ribbed cast iron with stiffness wall.
  • Harmonically stable Machine for complex part machining.
  • Table with integrated direct torque motor.
  • Rotary tilting angle with negative angle in table.
  • Large accessibility from the top.
  • Incremental measurement by optical encoders.
  • Powerful & precise high speed electro spindle.
  • Efficient chip disposal.
  • Electrical with quality device & panel AC.
  • Auto & manual coolant.
  • Centralized & programmable lubrication.

Simultaneously 5 Axis Machine

Bridge Type Structure

High Speed Machine

TPM friendliness

High Speed Electro Spindle

Technical Specification

Linear Axis X/Y/Z   K3X 8 Five K2X 10 Five
Travel mm 780 x 700 x 500 900 x 900 x 500
Rapid Feedrate m/min 50 50
Acceleration on Axis m/s2 5 5
Rotating Axis on Table A-C Table on 55° Plane Table on a 45° Plane
A :Tilting Deg. ─ 30° / 180° ─ 45° / 180°
C :Rotating Table Deg. 360° 360°
Working Position Deg. Horizontal Position = 0° Verticle Position = 90° Inclined = - 20° Horizontal Position = 0° Verticle Position =90°
Area mm φ 500 φ 630
Admissible Load kg 250 500
Rotating Speed rpm A Axis - 50                            C Axis - 50 A Axis - 40                            C Axis - 90
Spindle
Rotating Speed rpm 24000 24000
Taper HSK 63 A HSK 63 A
Power (S6/S1) kW 25/20 25/20
Torque (S6/S1) Nm 40/32 40/32
Characteristic Speed rpm 6000 6000
Accuracy      
 Linear Axis (X/Y/Z)
Positioning Uncertainty (P) mm 0.004 0.004
Repeatability (Ps medium) mm 0.002 0.002
 Rotating Axis (A/C)
Positioning Uncertainty (P) sec 7.2 7.2
Repeatability (Ps medium) sec 3.6 3.6
Tool Magazine
Pocket Qty. 20 20
Tool Length mm 250 250
Tool Diameter mm φ 90 φ 90
Tool Weight kg 8 8
Coolant
Flow-Pressure l/min-bar 30 - 3 30 - 3
Tank Capacity Ltr. 230 230
** Depends upon Work holding devices, Tooling and Job.